西门子中国授权一级代理商|PLC代理商

西门子中国授权一级代理商|PLC代理商

OverviewSIMATIC controllers for cost-effective automation solutions

The right controller every time: for plant building, mechanical engineering, production or process engineering, small autonomous applications, as well as highly complex applications. Siemens offers the optimal control solution for every application area - whether PLC or PC-based.西门子中国授权一级代理商|PLC代理商

The range encompasses logic modules including Basic, Advanced and Distributed Controllers, as well as Software Controllers.

直流斩波器不仅能起调压的作用(开关电源),同时还能起到有效地抑制电网侧谐波电流噪声的作用。通信电源的二次电源DC/DC变换器已商品化,模块采用高频PWM技术,开关频率在500kHz左右,功率密度为5W~20W/in3。
随着大规模集成电路的发展,要求电源模块实现小型化,因此就要不断提高开关频率和采用新的电路拓扑结构,当前已有一些公司研制生产了采用零电流开关和零电压开关技术的二次电源模块,功率密度有较大幅度的提高。UPS不间断电源(UPS)是计算机、通信系统以及要求提供不能中断场合所**的一种高可靠、**的电源。
交流市电输入经整流器变成直流,一部分能量给蓄电池组充电,另一部分能量经逆变器变成交流,经转换开关送到负载。为了在逆变器故障时仍能向负载提供能量,另一路备用电源通过电源转换开关来实现。现代UPS普遍了采用脉宽调制技术和功率M0SFET、IGBT等现代电力电子器件,电源的噪声得以降低,而效率和可靠性得以提高。
微处理器软硬件技术的引入,可以实现对UPS的智能化管理,进行远程维护和远程诊断。目前在线式UPS的上海腾桦电气设备有限公司容量已可作到600kVA。*小型UPS发展也很迅速,已经有0.5kVA、lVA、2kVA、3kVA等多种规格的产品。西门子中国授权一级代理商|PLC代理商变频器电源变频器电源主要用于交流电机的变频调速,其在电气传动系统中占据的地位日趋重要,已获得巨大的节能效果。变频器电源主电路均采用交流-直流-交流方案。工频电源通过整流器变成固定的直流电压,然后由大功率晶体管或IGBT组成的PWM高频变换器,将直流电压逆变成电压、频率可变的交流输出,电源输出波形近似于正弦波,用于驱动交流异步电动机实现无级调速

在共用K总线和P总线不分段的子机架UR1或UR2上运行西门子模块代理商-青海总代理   西门子中国授权一级代理商|PLC代理商

•所有在一个公用外设总线(P)和通讯(K)总线上操作的CPU运行状态(CPU运行系统性能)都将自动同步。•一个复杂的大任务可以拆开到多4个CPU上来计算。• 通过简单插入CPU实现性能的按比例升级是可能的。•增加系统资源(内存，标准区，计数器...)。 但输入/输出点数不会增加。• 可以把时间临界和非时间临界过程区域分离开来(即：一个*闭环控制器的*制)。• 多CPU可以共用一个CP模板和外部通讯。I/O 模板只能一个CPU。其中一个停止，其它CPU也将停止。•以下订货号的S7-CPU支持多CPU操作模式：6ES7412-1XF01-0AB06ES7413-1XG01-0AB06ES7413-2XG01-0AB06ES7414-1XG01-0AB06ES7414-2XG01-0AB06ES7414-2XJ00-0AB0版本 3 以上6ES7416-1XJ01-0AB06ES7416-2XK00-0AB0 版本 3以上6ES7416-2XL00-0AB0 版本 3 以上• M7-CPU 486-3 Pentium 75 MHz (原为：CPU488-4)和488-3 Pentium 120 MHz (原为：CPU 488-5)目前不支持多CPU操作。

在分段子机架CR2上的运行西门子模块代理商-青海总代理   

•分段子机架包含有两个独立的P总线，其中10个插槽在分段1中，8个插槽在分段2。•每个外围总线分段使用一个CPU，I/O模块分配到本地的CPU上。CPU各自独立运行，没有运行状态的同步。•公共通讯总线允许子单元间进行通讯而不需要附加硬件。• 因此，2 个单独的控制器可以组态到一个CR中。这样可以在柜子中节省空间。•成本上很节约，因为仅需一个子机架和一个电源供应单元。• S7-400 和M7-400CPU都可以没有任何的限制地使用，也就是说，甚至可以将S7 和M7 CPU一起放在CR2中。(警告：要把M7-CPU 486-3 与488-3 一起在CR2中运行，只能使用M7-SYS V2.0 和 STEP7 基本软件 V3.1。原来的CPU 488-4 与488-5 不能够在CR2中运行)。2．测试环境

Jump to

Overview

Application

Design

Function

Function西门子中国授权一级代理商|PLC代理商

Overview

The compact, easy-to-use and low-cost solution for simple control tasks

Compact, easy to operate, universally applicable without accessories

"All in one": Integrated display and operator panel

36 different functions can be connected at the press of a button or by means of PC software; up to 130 times

LOGO! 8 : 38/43 different functions can be linked at the press of a button or using PC software; up to 200/400 times

Functions are easy to change at the press of a button. No more time-consuming rewiring

Catalog ST 70:

You can also find information about LOGO! in the Catalog ST 70:

https://support.industry.siemens.com/cs/attachments/109744167/simatic-st70-complete-english-2022.pdf

Application西门子中国授权一级代理商|PLC代理商

The LOGO! logic module is the convenient, user-friendly solution for simple open-loop and closed-loop control tasks.

LOGO! can be implemented universally, e.g.:

Building services/electrical installation sector (lights, blinds, awnings, gates, access control points, barriers, ventilation systems...).

Control cabinet manufacture.

Mechanical engineering (pumps, small presses, compressors, lifting platforms, conveyor belts ...).

Special controls for conservatories, greenhouses.

Signal preprocessing for other controllers.

LOGO! logic modules are modular and can be flexibly expanded to suit the application.

Marine approvals

American Bureau of Shipping, Bureau Veritas, Det Norske Veritas, Germanischer Lloyd, Lloyds Register of Shipping; Polski Rejestr Statków, etc.

Design西门子中国授权一级代理商|PLC代理商

LOGO! Modular is available in different versions for different connection voltages (12 V DC, 24 V DC, 24 V AC, 115/230 V DC, 115/230 V AC):

Standard versions.

Pure versions, cost-optimized without key control panel and display.

The LOGO! version have the following distinguishing features:

R: Relay output.

C: Clock/time switch.

E: Ethernet interface.

o: without display.

LOGO! is simple:

Key control panel and display in one device. Further tools are not required.

Power failure-proof backup of switching program and setpoints (e.g. timers) due to integrated EEPROM.

LOGO! saves space:

e.g. LOGO! 230RC: 72 x 90 x 55 mm (W x H x D).

Adapted installation in the distributor box (same dimensions as ground-fault circuit interrupter).

LOGO! offers maximum flexibility and can be implemented universally:

Expandability:西门子中国授权一级代理商|PLC代理商
Expansion modules can be connected depending on the application.

LOGO! is communication-capable:

Optional communication modules enable the connection to AS-Interface and KNX Konnex networks.

LOGO! 7 and 8 can communicate with other LOGO! units or also with SIMATIC Controllers or SIMATIC Panels

西门子中国授权一级代理商|PLC代理商