Integrated industrial network for data, voice, video, and Industrial Ethernet

Integrated system diagnostics with PROFINET, SINEC NMS, Syslog, and SNMP

Integrated security functions offer protection against unauthorized network access and configuration, see technical specifications

Coated printed circuit boards (conformal coating)

Installation altitudes up to 4 000 m possible

Extended temperature range from -40 °C to +70 °C

NAMUR NE 21-compliant

Firmware support of: S2 device and CiR/H-CiR

The devices are released for SIMATIC PCS 7 and SIMATIC PCS neo and are integration capable

With SCALANCE XC206-2G PoE EEC, simple data and power supply via the Ethernet cable to the connected end devices is also possible. In addition, high-performance networks can be implemented over long distances with 2x 10 Gbps SFP ports

A 4-pin terminal block (push-in) for connecting the redundant supply voltage (2 x 24 DC)

LEDs for signaling on-site status information:

Port status

Port mode (10/100/1 000 Mbps, full/half-duplex)

Status of the two power supplies

Signaling contact status

Signal mask (setpoint status)

Redundancy manager mode (RM mode)

Standby mode西门子中国一级总代理

A 2-pin terminal block (push-in) for connecting the floating signaling contact

A SELECT/SET key for on-site configuration of the signaling contact

10/100/1000BASETX, RJ45 connection;
Automatic detection of the data rate (10 or 100 Mbps), with autosensing and autocrossover function for connecting IE FC cables via IE FC RJ45 plugs over distances up to 100 m.西门子中国一级总代理

SFP slots for 100BASE-X, 1000BASE-X, 10GBASE-X
LC connections with different ranges can be implemented via SFP modules (multimode/single-mode up to 200 km)

With SCALANCE XC206-2G PoE EEC, the SFP interfaces of the combo ports support both 1 000 Mbps SFPs and 10 000 Mbps SFP+

Setup of electrical and optical Industrial Ethernet line, star and ring topologies

Use in ring topologies together with SCALANCE X-200, SCALANCE X-300, SCALANCE XM-400 and XR-500

Fast redundancy in the ring with:

High Speed Redundancy Protocol (HRP), max. 0.3 second reconfiguration time with 50 switches in the ring

PROFINET MRP (Media Redundancy Protocol), max. 0.2 second reconfiguration time of the ring with 50 switches in the ring

Redundant coupling of MRP rings through MRP interconnection function

Redundant connection of MRP rings in RSTP networks through RSTP+ function西门子中国一级总代理

The functioning of the ring is continuously monitored by the integrated redundancy manager. It recognizes transmission path failures in the ring or failure of a SCALANCE XC-200EEC and activates the substitute path within 0.3 seconds or 0.2 seconds with MRP

Uncrossed connecting cables can be used due to autocrossover function integrated in the ports

Easy diagnostics using signaling contact, SNMP and web browser

Easy copper cable diagnostics via web browser for localizing cable breaks

Fiber monitoring: Easy fiber-optic cable port diagnostics by means of web browser and SNMP for early detection of changes on the fiber-optic cable line or at the fiber-optic cable ports

Ordering data

 西门子中国一级总代理

Accessories

Product Information

The XC-200EEC versions are optimized for use in process automation and feature the following properties:

Conformal coating PCBs

Max. installation altitude 4 000 m

Extended temperature range from -40 °C to +70 °C

NAMUR NE 21-compliant

Firmware support for S2 device and CiR/H-CiR

Release and integration capability for SIMATIC PCS 7

Electrical or optical connection to stations or networks according to port characteristics of the devices

Versions with transmission rates up to 1 000 Mbps, electrical or optical

Switches with electrical ports:

SCALANCE XC208 (EEC)
With 8x RJ45 ports 10/100 Mbps for mounting in the control cabinet

SCALANCE XC208G (EEC)
With 8x RJ45 ports 10/100/1000 Mbps for mounting in the control cabinet

SCALANCE XC216 (EEC)
With 16x RJ45 ports 10/100 Mbps for mounting in the control cabinet

Switches with electrical and optical ports

SCALANCE XC206-2SFP (EEC)
With 6x RJ45 ports 10/100 Mbps and 2x SFP plug-in transceivers with 100 or 1 000 Mbps

SCALANCE XC206-2SFP G (EEC)
With 6x RJ45 ports 10/100/1 000 Mbps and 2x SFP plug-in transceivers 1 000 Mbps

SCALANCE XC216-4C G (EEC)
With 12x RJ45 ports 10/100/1 000 Mbps and 4x Gigabit combo ports (either 10/100/1 000 Mbps RJ45 port or SFP plug-in transceiver 1 000 Mbps can be used)

SCALANCE XC224-4C G (EEC)
With 20x RJ45 ports 10/100/1 000 Mbps and 4x Gigabit combo ports (either 10/100/1 000 Mbps RJ45 port or SFP plug-in transceiver 1 000 Mbps can be used)

Operational reliability in industrial environments, e.g. due to rugged enclosure, redundancy, temperature range from -40 °C to +70 °C

Increased plant availability thanks to:

Redundant power supply

Redundant network structures based on fast media redundancy HRP and MRP西门子中国一级总代理

Standby redundancy between HRP rings

Prevention of loops by standard STP, RSTP and MSTP mechanisms, and loop detection

SFP plug-in transceivers can be replaced or expanded during operation

Easy device replacement by means of plug-in C-PLUG removable data storage medium

Link aggregation (IEEE 802.3ad) for parallel use of ports to increase transmission rate failure safety

Integration of switches in systems with S2 single system redundancy and Configuration in Run (CiR/H-CiR)

Since Configuration in Run (CiR/H-CiR) is supported, PROFINET-defined configuration changes to the switch are performed during operation

Configuration as a service bridge permits dedicated temporary access from the plant bus to the fieldbus for advanced commissioning and diagnostic purposes

Easy monitoring and diagnostics due to separate diagnostics station with integrated LEDs, signaling contact, web browser, traps and e-mail transmission

Easy integration in the process and system diagnostics with PROFINET via SIMATIC PCS 7

Integration of Industrial Ethernet switches into existing network management systems (e.g. SINEMA Server or SINEC NMS) by means of SNMP access

Reliable plug-in connection thanks to rugged, industry-standard device connection in conjunction with industry-standard FastConnect connectors

Integration into the diagnostics of a PROFINET controller with expanded diagnostics functions for a consistent diagnostics concept, including network infrastructure

Diagnostics of data traffic by means of a parameterizable mirror port with a standard commercial network analyzer

Optimized support of PROFINET real-time communication (RT) through prioritizing西门子中国一级总代理

Fast device replacement in the event of a fault by using the optional C-PLUG removable data storage medium (not included in scope of supply)

Redundant interfacing to company networks
The XC-200EEC switches support the standardized redundancy procedures Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP). This enables a subnetwork to be connected redundantly to a higher level corporate network with reduced requirements for the reconfiguration time (in the order of seconds)

Support of virtual LANs (VLANs)
For structuring Industrial Ethernet networks with a fast growing number of nodes, a physically existing network can be divided into several logical networks

Load limiting with use of multicast protocols (e.g. querier, video)
By learning the multicast sources and targets (IGMP snooping), XC-200EEC switches can also filter multicast data traffic, thus limiting the load in the network. Multicast and broadcast traffic can be limited.

Firmware support as S2 device and CiR/H-CiR

SCALANCE XC-200EEC can be diagnosed in SIMATIC PCS 7 and SIMATIC PCS neo and faults in the switches are detected by both PLCs in a redundant H system. The CiR/H-CiR functionality enables changes during operation, even when configuring the SCALANCE XC-200.西门子中国一级总代理

Easy connection of PoE end devices such as IP cameras or access points via PoE function and realization of high-performance networks over long distances (SCALANCE XC206-2G PoE EEC only)

Fast Ethernet and Gigabit rings with fast media redundancy

Improved reconfiguration times for redundant connection of MRP rings in RSTP networks through RSTP+ function

Star topology with XC-200EEC switches
Each SCALANCE XC-200EEC switch represents a star point which can interconnect as many as 8/16/24 nodes or subnetworks.

Maximum line length for twisted pair:

Max. 100 m with Industrial Ethernet FC cable and Industrial Ethernet FC plugs

Max. 10 m using patches with TP cord

Length of the optical cables:

Maximum line length between two modules for multimode fiber-optic conductors:
– 5000 m at 100 Mbps
– 750 m at 1 Gbps

Maximum line length between two modules for single-mode FOCs:
- 200 km at 100 Mbps
- 120 km at 1 Gbps

IP address:西门子中国一级总代理
The IP address can be assigned by means of the DHCP (Dynamic Host Configuration Protocol). If there is no corresponding server in the network, the IP address can be assigned using the supplied software tool SINEC PNI (Primary Network Initialization) or STEP 7 / TIA Portal. Assignment via the local console port is also possible

Service bridge:
For extended commissioning and diagnostics purposes, the SCALANCE XC-200EEC can be configured as a service bridge. The special configuration permits dedicated temporary access from the plant bus to the fieldbus, while simultaneously ensuring the logical separation between the fieldbuses.

Power

Port status

Data traffic

Signaling contact

Redundancy manager function (RM)