西门子PLC模块广州授权一级代理商

西门子PLC模块广州授权一级代理商

The register control is made available based on the SIMOTION Print Standard Add On TRC1000 application. Workshops are available for experienced SIMOTION users.

The modular SIMOTION TRC1000 wedge mark sensor comprises the IDS-PN evaluation unit with intelligent measured value processing (1-channel as gray value) and specific accessories. It is directly connected to PROFINET IO with IRT via an integrated 2-port switch whereby it is integrated in the line topology of the real-time PROFINET network of the machine. It can be adapted to the particular measurement task or machine situation using the expansion accessories.西门子PLC模块广州授权一级代理商
The DS sensor module, for example, expands the basic device to include a second fiber-optic cable connection for measuring on the reverse side, or measuring marks that are located transversely. Both modules are connected to 24 V DC using a prefabricated cable (available in two lengths), and a connecting cable (open at one end). The fiber-optic cable is equipped with an optical system and can be plugged into the IDS-PN or the DS. The cable is available in two lengths. The optical system is attached to the machine and can be adjusted using the three-section fiber-optic mounting set and standard ITEM profile elements. Further, the optical power and measured value processing for special measurement tasks can be adjusted using the fiber-optic calibration tool.西门子PLC模块广州授权一级代理商

Topology of the SIMOTION TRC1000 integrated register control

设计西门子PLC模块广州授权一级代理商Interfaces of the IDS-PN sensor module

Display and diagnostics

10 LEDs to display device operating states and errors – and for basic communication diagnostics.

2 measuring sockets for diagnostics and to update the firmware. These are not required in operation and are reserved for the use of experienced development engineers.
1 x M12 [DIAG], 12-pole, A-coded (Binder No.: 99 0491 12 12).
Program/debug interface, 4-channel analog value output (2 x sensor analog signal, 2 x analog monitor) and 2-channel digital output (2 x sensor digital signal) for development engineers.
1 x M8 [RS232], 6-pole (Binder No.: 79 3465 52 06).
RS232 command interface for development engineers, e.g. for diagnostics and parameterizing the sensor and the analog signals.西门子PLC模块广州授权一级代理商

Communication

2 x M12 [Ethernet 0 / Ethernet 1], 4-pole, D-coded, PROFINET IO with IRT.
Integrated 2-port switch to configure a PROFINET line-type topology, e.g. with additional sensors and the SIMOTION control. In addition to real-time data, acyclic data – such as signal trace and sensor parameterization – are also transferred via this interface. Matching M12 PROFINET prefabricated cables are available, or users can assemble them themselves (see PROFINET).

I/O devices

1 x fiber-optic cable connection, 3-pole.
Plug-in screw connection for the fiber-optic cable, which is available in 2 lengths.

1 x M8 [external sensor], 4-pole.
To connect a DS sensor module for a second fiber-optic cable. The required prefabricated connecting cable is available in two lengths, as an accessory.

Power supply

1 x M8 [24V=], 3-pole.
A prefabricated cable to connect the 24 V DC electronics power supply is available as an accessory.

Additional interfaces

1 x M12 [Encoder], 8-pole, A-coded, encoder connection (Binder No.: 99 1487 812 08).
A TTL incremental encoder can be directly connected here (e.g. for feedback signals from a side register actuator motor).

Option module西门子PLC模块广州授权一级代理商

The SIMOTION TRC1000 accessory DS sensor module extends the IDS-PN to include a second, external fiber-optic cable connection for measuring register marks at both sides and for two-web measurements, as well as for horizontal mark arrangements:

1 x fiber-optic cable connection, 3-pole.
Plug-in screw connection for the fiber-optic cable, which is available in 2 lengths (see IDS-PN).

1 x M8 [IDS-PN], 4-pole.
Connection to the IDS-PN basic unit using prefabricated cables.

集成西门子PLC模块广州授权一级代理商

SIMOTION TRC1000 mounting example with ITEM profiles

Mounting

The mounting set shown for mounting to ITEM profile elements is used to attach the fiber-optic cables.

Horizontal crossbar standard part, e.g.: ITEM profile 8, light, natural, 40 x 40 (0.0.026.33) or ditto 80 x 40 (0.0.026.34) with length dependent on the machine (2)西门子PLC模块广州授权一级代理商

概述

SIMATIC IPC and HMI family 12-22 inch西门子PLC模块广州授权一级代理商

User-friendly visualization at a control station is a decisive feature for a powerful and precise register control system that is easy to set up. This is the interface between the operation of the machine and technology integrated in the drive system. Print tasks can be transferred to the control system using a powerful Panel PC in conjunction with a simple-to-operate visualization application. Using convenient touch panels, when setting up, print marks can be effectively measured and printing cylinder positions adapted. Register errors are continually monitored during a print run and deviations displayed. An application based on WinCC TIA is available for SIMATIC IPC Panel PCs. This application provides the basic and essential functions for state-of-the-art register control. As a result of the open program code, existing functions can be adapted as required. It is also possible to implement additional system-specific functions. We recommend 15" inch as the minimum screen size for user-friendly operation at the main panel. Local panels that are only used to display oscilloscope data can be smaller.

Ordering information:西门子PLC模块广州授权一级代理商

When using the standard application, approximately 512 power tags are required to visualize the register control for a maximum of 8 print units. We recommend that the application is adapted to address the particular system scope.

For local panels where only local control locations are displayed, the application can be reduced so that 128 power tags are sufficient. SIMATIC IPC and WinCC TIA Runtime can be ordered as a bundle.

HMI accessories (ordering data for IPCs and WinCC TIA Advanced)

SIMATIC IPC277D TOUCH 6AV7881…

Runtime licenses:西门子PLC模块广州授权一级代理商

WinCC Runtime Advanced 128 power tags 6AV2104-0BA03-0AA0

WinCC Runtime Advanced 512 power tags 6AV2104-0DA03-0AA0

WinCC Runtime Advanced 2048 power tags 6AV2104-0FA03-0AA0

WinCC Runtime Advanced 4096 power tags 6AV2104-0HA03-0AA0

WinCC Runtime Advanced 8192 power tags 6AV2104-0KA03-0AA0

西门子PLC模块广州授权一级代理商