nstallation of a ring topology with the SCALANCE XF204-2BA.西门子模块总代理上海代理商

The SCALANCE XF204-2BA Industrial Ethernet switch with IP20 degree of protection is installed in a control cabinet together with the nodes to be connected. Electrical and optical versions can be installed together in star, line and ring topologies.

When configuring the network, the following boundary conditions must be observed:

Length of the twisted pair line between two SCALANCE XF-200BA switches:
Max. 100 m with IE FC cable and IE FC RJ45 plug 180 with BusAdapter BA RJ45. By means of the BA 2xRJ45VD HA, it is also possible to achieve electrical cabling lengths of up to 1 000 m.

IP address:
The IP address is assigned by means of the DHCP (Dynamic Host Configuration Protocol). If there is no corresponding server in the network, the IP address can be assigned using the supplied software tool PST (Primary Setup Tool) or STEP 7/TIA Portal.
SCALANCE XF204-2BA device configuration is with STEP 7 or the TIA Portal.

Optimal design of a ring topology with SCALANCE XF-200BA and SCALANCE XC-200

Commissioning and diagnostics西门子模块总代理上海代理商

PROFINET diagnostic interrupts from the SCALANCE XF204-2BA can be displayed with the appropriate SIMATIC engineering tools and then processed in the PLC with an expanded diagnostic function. The engineering outlay for the PLC and HMI has been drastically reduced due to the complete integration in the SIMATIC concept for system error messages.

The SCALANCE XF204-2BA Industrial Ethernet switch can also be integrated into a network management system, e.g. SINEC NMS, through the standardized Simple Network Management Protocol (SNMP). In the event of faults in the device, error messages (SNMP traps) can be sent to a network management system (e.g. SINEC NMS) or as an email to a specified network administrator.

The integrated web server enables configuration and diagnostics settings to be made using a standard web browser (e.g. port configuration). Statistical information can also be read out over the web server (e.g. port capacity utilization).

The following information is displayed on site by LEDs:

Voltage/power

Errors西门子模块总代理上海代理商

Redundancy

Ethernet communication via 2, 4 or 8-wire copper cables for communication up to 1 000 m with VD technology

Article number6GK5204-2AA00-2GF26GK5204-0BA00-2GF2product type designationSCALANCE XF204-2BASCALANCE XF204product optionsXF-200 base device without mounted BusAdapterXF-200 base device with mounted BusAdapterstransfer rate  transfer rate10 Mbit/s, 100 Mbit/s10 Mbit/s, 100 Mbit/sinterfaces for communication integrated  number of electrical connections  ● for network components or terminal equipment04interfaces other  number of electrical connections  ● for signaling contact11● for power supply11type of electrical connection  ● for signaling contact2-pole terminal block2-pole terminal block● for power supply2-pole terminal block2-pole terminal blockdesign of the removable storage  ● C-PLUGYesYessignal inputs/outputs  operating voltage of the signaling contacts  ● at DC rated value24 V24 Voperational current of the signaling contacts  ● at DC maximum0.1 A0.1 Asupply voltage, current consumption, power loss  product component connection for redundant voltage supplyYesYestype of voltage 1 of the supply voltageDCDC● supply voltage 1 rated value24 V24 V● power loss [W] 1 rated value8.6 W8.6 W● supply voltage 1 rated value19.2 ... 28.8 V19.2 ... 28.8 V● consumed current 1 maximum0.36 A0.36 A● type of electrical connection 1 for power supply2-pole terminal block2-pole terminal block● product component 1 fusing at power supply inputYesYes● fuse protection type 1 at input for supply voltage2.5 A (cannot be changed by user)2.5 A (cannot be changed by user)ambient conditions  ambient temperature  ● during operation-40 ... +70 °C-40 ... +70 °C● during storage-40 ... +85 °C-40 ... +85 °C● during transport-40 ... +85 °C-40 ... +85 °Crelative humidity  ● at 25 °C without condensation during operation maximum95 %95 %protection class IPIP20IP20design, dimensions and weights  西门子模块总代理上海代理商
designcompactcompactwidth100 mm100 mmheight117 mm117 mmdepth74 mm74 mmnet weight0.21 kg0.25 kgfastening method● 35 mm top hat DIN rail mountingYesYes● wall mountingNoNo● S7-300 rail mountingNoNo● S7-1500 rail mountingNoNoproduct features, product functions, product components general  cascading in the case of a redundant ring at reconfiguration time of <\~0.3\~s5050cascading in cases of star topologyany (depending only on signal propagation time)any (depending only on signal propagation time)product functions management, configuration, engineering  product function  ● CLIYesYes● web-based managementYesYes● MIB supportYesYes● TRAPs via emailYesYes● configuration with STEP 7YesYes● port mirroringYesYes● multiport mirroringYesYes● PROFINET IO diagnosisYesYesPROFINET conformity classBBnetwork load class according to PROFINET2product function switch-managedYesYesprotocol is supported  ● TelnetYesYes● HTTPYesYes● HTTPSYesYes● TFTPYesYes● FTPNoNo● BOOTPNoNo● DCPYesYes● LLDPYesYes● SNMP v1YesYes● SNMP v2YesYes● SNMP v3YesYesidentification & maintenance function  ● I&M0 - device-specific informationYesYes● I&M1 – higher level designation/location designationYesYesproduct functions diagnostics  product function  ● port diagnosticsYesYes●西门子模块总代理上海代理商
西门子模块总代理上海代理商

You can order supplementary components for the SIMATIC NET cabling range from your local contact. Technical support on this subject is available from:

J. Hertlein
DI PA DCP IWA
Tel.: +49 (172) 3172810 
Email: juergen.hertlein@siemens.com

Selection Tool:

To support the selection of SCALANCE network components, the TIA Selection Tool is available at:

www.siemens.com/tst

Ordering overview:

You can find more information on the FastConnect range in the "Cabling technology for communication networks in industry" ordering overview.

西门子模块总代理上海代理商