西门子中国一级代理商电线电缆代理商总代理

With SINAMICS DriveSim Basic, you can implement three major use cases:

Providing load characteristics for drive selection and dimensioning

Virtual commission your PLC already in the design phase

Test and improve interaction between PLC, drives and application virtually

Use case 1: Providing load profiles for drive sizing

If you are designing a machine, you want to make sure that you select the SINAMICS converter and SIMOTICS motor most suitable for you drive application. As SINAMICS DriveSim Basic is control-unit-agnostic and thus represents a generic drive, you can parametrize it according to the functionality of your application. Running the simulation results in load characteristics, i.e. torque or speed curves over time. You can import these load profiles into TIA Selection Tool to select the suitable Control Unit and dimension the drive to best fit to the demand. So as a result you have well selected SINAMICS converters and SIMOTICS motors with the help of the digital twin.西门子中国一级代理商电线电缆代理商总代理

Use case 2: Virtual commission your PLC already in the design phase

If you are designing a machine, you want to make sure the PLC code works with your SINAMICS drive. After writing the PLC code in TIA Portal, you can connect it via PLCSIM Advanced to any time-based simulation tool (e.g. SIMIT). Integrated into the simulation tool, SINAMICS DriveSim Basic acts as a realistic communication partner for the PLC. Next, you can commission the virtual PLC in TIA Portal as you would do with a real PLC connected to a real drive. Without simulation, you would need to do that on-site. With simulation, you not only save time, but also have the freedom to try out various configurations and optimize your PLC code early in the process.西门子中国一级代理商电线电缆代理商总代理Use case 3: Test and improve interaction between PLC, drives and application virtually

With the third Use case, you can connect a simulation tool such as NX Mechatronic Concept Designer to visualize the mechanical movements of your application. This way, you ensure that the drive behaves according to the desired machine performance. You can test several fault scenarios and optimize the interaction between PLC, application and drive virtually so overall, you can avoid unplanned machine behavior and increase the

SINAMICS DriveSim Basic provides easy-to-use models for PROFIdrive-enabled SINAMICS converters, so you can create a digital twin of your drive.

The models are validated and tested against real SINAMICS converters and are available in the form of a standardized FMU (Functional Mockup Unit). Therefore, they are compatible with various standard time-based simulation programs such as SIMIT, Simcenter Amesim, ANSYS Twin Builder, MATLAB Simulink or Hopsan.

SINAMICS DriveSim Basic is another element in your engineering toolbox. Together with other virtual Siemens solutions, e.g. SIMATIC S7-PLCSIM Advanced or NX Mechatronics Concept Designer, a consistent model-based development process can be implemented.

西门子中国一级代理商电线电缆代理商总代理

非住宅和工业建筑中的配电系统电气规划从未像在这样复杂。为了确保规划人员对 SINAMICS 变频器进行佳电气规划，西门子通过以下高效软件工具提供支持：SIMARIS design 用于进行选型计算，SIMARIS project 用于计算配电柜的空间要求。

支持的 SINAMICS 变频器：

SINAMICS G120、SINAMICS G120D、SINAMICS G120X

SINAMICS G115D

SINAMICS G130、SINAMICS G150

Speed西门子中国一级代理商电线电缆代理商总代理up time-to-market for OEMs

Test validated SINAMICS models under real conditions already at the design or planning stage and make needed adjustments

Identify issues and improvement capabilities early in the design stage and reduce testing effort to save time and cost

Download is free of charge. The ideal entry point for drive system simulation

Valid for the most commonly used Siemens drives

Advantages of SINAMICS DriveSim Basic compared to SIMIT PROFIdrive blocks: 

Increased level of detail due to speed controller, current setpoint filters and internal load model

Identical parameter values and meaning as in the real SINAMICS device

Direct reference to SINAMICS documentation

Validated against the real SINAMICS drive西门子中国一级代理商电线电缆代理商总代理

No wiring effort to represent functional configurations

Significant reduction of SIMIT simulation tags (even more is possible if unused in-/ outputs are deselected within the Component Type Editor (CTE)

Enables simulation of an (internal) two-mass oscillator as application with realistic SINAMICS parameter settings, besides the known limitations by the minimum sample time in SIMIT

Compatible with every FMU Co-Simulation 2.0 compatible simulation too

西门子中国一级代理商电线电缆代理商总代理